ESS AMT-1-A Monitor

Request the ESS AMT-1-A Monitor brochure
Request the ESS AMT-1-A Monitor schematic
Request the ESS AMT-1-A Monitor owners manual
Request the ESS AMT-1-A Monitor service manual



Advertisement

General information[contribute]

The ESS AMT-1-A Monitor is a ribbon speaker. It is part of the AMT series. It was manufactured from 1977 to unknown.

jonathan aaron (July 2, 2009): This tower loudspeaker shares the same footprint and nearly identical cabinet design as the AMT MONITOR and the ever-popular AMT3 ROCK MONITOR towers. In the AMT1aM tower, a pulp coned 12" woofer was utilized as opposed to the more common Bextrene plasticized cone of other builds.

Early versions suggest a 3/4" styrene bass reflex disc mounted front-firing directly below the front-firing 12" active woofer. Also suggested by early versions were AMT drivers with a full squared-casing on the lowest portion, and a "bow-tie" casing in the upper case. < - - by this i mean the AMT was in mid-revision of the more prevalent BOW-TIE design where the cut-a-way was utilized bot atop and below on the whole of the black casing. Later version suggest a 1/4" styrene bass reflex disc and the silver-finned (focus plates) with the black BOW-TIE casing intact on the AMT. A fine fine speaker, tall and pretentious, heavy as sin, and well worth the effort should they need servicing.

Related models

The following models were also produced in the AMT series:

ESS AMT
ESS AMT Monitor
ESS AMT-1
ESS AMT-1 Tower
ESS AMT-1-A
ESS AMT-1-AB
ESS AMT-1-AM
ESS AMT-1-B
ESS AMT-1-C
ESS AMT-1-D
ESS AMT-10-B
ESS AMT-16
ESS AMT-2
ESS AMT-3 Monitor
ESS AMT-320
ESS AMT-330
ESS AMT-4
ESS AMT-5
ESS AMT-5-A
ESS AMT-6 Pro
ESS AMT-8
ESS AMT-8-H
ESS Heil Elite
ESS Tempest

Alternate names[contribute]

ESS Heil AMT-1-A Monitor

Forum topics on the ESS AMT-1-A Monitor

No topics on the ESS AMT-1-A Monitor have been found. If you want to start a new topic, click here.